TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 1073 of 1632
TM 9-2320-366-20-2
Change 1
2-1822.5
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter
to connector P115 socket 17.
(3)
Connect negative (-) probe of multimeter
to a known good ground and note reading
on multimeter.
(4)
If continuity is not present in step (3),
repair wire 143 from connector P115-17 to
terminal board 2 pin 27 (para 2-45) or
replace WTEC III dashboard cable
assembly (para 7-11).
(5)
Connect positive (+) probe of multimeter
to connector P115 socket 25.
(6)
Connect negative (-) probe of multimeter
to a known good ground and note reading
on multimeter.
(7)
If continuity is not present in step (6),
repair wire 144 from connector P115-25 to
chassis ground (para 2-45) or replace
WTEC III dashboard cable assembly
(para 7-11).
(8)
Connect positive (+) probe of multimeter
to connector P115 socket 32.
(9)
Connect negative (-) probe of multimeter
to a known good ground and note reading
on multimeter.
(10)
If continuity is not present in step (9),
repair wire 143 from connector P115-32 to
terminal board 2 pin 16 (para 2-45) or
replace WTEC III dashboard cable
assembly (para 7-11).
(11)
Connect connector P115 to WTEC III
Transmission ECU.
(12)
Connect connector clamp on connector
P115.
Back to Top
