TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 1068 of 1632

TM 9-2320-366-20-2

2-1822

Change 1

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Multimeter, Digital (Item 22, Appendix C)

STE/ICE-R (Item 41, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

KNOWN INFO

POSSIBLE PROBLEMS

Faulty WTEC III dashboard

cable assembly.

Faulty WTEC III TPSS.

Faulty WTEC III transmission

ECU.

1.

Does main code 23

logged in WTEC III TPSS

return after clearing

diagnostic code?

CAUTION

Read CAUTION

on following page.

START

Circuit Breakers CB43 and

CB79 OK.

TEST OPTIONS

WTEC III Diagnostic Code

Clearing procedure.

REASON FOR QUESTION

Fault corrected.

f39. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DISPLAYS MAIN CODE

23 AND ANY SUB CODE

YES

NO

NOTE

Perform electrical system troubleshooting e1.

Circuit Breaker Does Not Operate on circuit

breakers C43 and CB79 prior to begining this

task.

If WTEC III TPSS does not

display any diagnostic code

after clearing, an intermittent

problem was detected and

corrected.

If diagnostic code

is logged after clearing,

further troubleshooting is

required.

Tools and Special Tools (Cont)

Wrench Set, Socket (Item 51, Appendix C)

Personnel Required

(2)

References

TM 9-4910-571-12&P