TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 1061 of 1632

CONTINUITY TEST

Change 1

2-1815

TM 9-2320-366-20-2

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector P116-32.

(3)

Connect negative (-) probe of multimeter to

connector PX33P and note reading on

multimeter.

(4)

Connect negative (-) probe of multimeter to

all other sockets in connector PX33, one at

a time, and note reading on multimeter.

(5)

If continuity is not present in step 3, or

continuity is present in step 4, repair wire

143 (para 2-45) or replace WTEC III

dashboard cable assembly (para 7-11).

(6)

Connect connector PX33 to WTEC III TPSS.

(7)

Install instrument panel assembly

(para 7-15).

(8)

Clear diagnostic codes (para 8-5).