TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 1055 of 1632

CONTINUITY TEST

Change 1

2-1809

TM 9-2320-366-20-2

(1) Remove kick panel (para 16-3).

(2) Disconnect connector clamp from

connector P115.

(3) Disconnect connector P115 from WTEC III

transmission ECU.

(4) Set multimeter to ohms.

(5) Connect positive (+) probe of multimeter

to connector P115-1.

(6) Connect negative (-) probe of multimeter to

all other sockets in connector P115 (except

P115-16), one at a time, and note reading

on multimeter.

(7) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(8) Connect positive (+) probe of multimeter

to connector P115-16.

(9) Connect negative (-) probe of multimeter to

all other sockets in connector P115 (except

P115-1), one at a time, and note reading on

multimeter.

(10) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(11) If continuity is present repair wire 136

(para 2-45) or replace WTEC III dashboard

cable assembly (para 7-11).