TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 1059 of 1632

(1)

Disconnect connector clamp from

connector P116.

(2)

Disconnect connector P116 from WTEC III

transmission ECU.

(3)

Remove instrument panel assembly for

access (para 7-15).

(4)

Disconnect connector PX33 from WTEC III

TPSS.

(5)

Set multimeter to ohms.

(6)

Connect positive (+) probe of multimeter

to connector P116-16.

(7)

Connect negative (-) probe of multimeter to

connector PX33R and note reading on

multimeter.

(8)

Connect negative (-) probe of multimeter to

all other sockets in connector PX33, one at

a time, and note reading on multimeter.

(9)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(10)

If continuity is not present in step 7, or

continuity is present in step 8 or step 9,

repair wire 136 (para 2-45) or replace

WTEC III dashboard cable assembly

(para 7-11).

CONTINUITY TEST

Change 1

2-1813

TM 9-2320-366-20-2