TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1017
2-1017
2-1017
2-1017
2-1017
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
PTO switch terminal 5.
(3)
Connect negative (-) probe of multimeter to
PTO switch terminal 1.
(4)
Position PTO switch to on (TM 9-2320-366-10-1)
and note reading on multimeter.
(5)
If continuity is not present, replace PTO switch
(para 7-18).
(6)
Position PTO switch to off
(TM 9-2320-366-10-1).