TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1085
2-1085
2-1085
2-1085
2-1085
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
PDP, terminal 87a, where WTEC III relay K34
was removed.
(3)
Connect negative (-) probe of multimeter to
connector PX50-2 and note reading on
multimeter.
(4)
If continuity is not present, repair wire 1697
(para 2-45) or replace WTEC III dashboard
cable assembly (para 7-11).
(5)
Connect connector PX50 to differential lock
solenoid connector.