APPENDIX C, TOOLS IDENTIFICATION LIST.
Lists equipment used in the performance of maintenance
and references publications which contain information regarding the equipment.
APPENDIX D, EXPENDABLE/DURABLE SUPPLIES AND MATERIALS LIST.
Lists expendable and durable
items used in the performance of maintenance.
APPENDIX E, ILLUSTRATED LIST OF MANUFACTURED ITEMS.
Illustrates and describes items that must
be fabricated from bulk materials for repair of the MTV.
APPENDIX F, TORQUE LIMITS.
Lists the standard torque values for specific attaching hardware.
APPENDIX G, MANDATORY REPLACEMENT PARTS.
APPENDIX H, LUBRICATION ORDER.
APPENDIX J, ADDITIONAL AUTHORIZATION LIST (AAL).
APPENDIX K, TRANSMISSION/TRANSMISSION CONTROLS ADAPTABILITY CHART.
required to mate different transmission configurations with WTEC II or WTEC III controls.
Lists important subjects contained in volume 2 in alphabetical order and gives the
associated paragraph number.
There are several ways to find the information you need in this manual. They are as follows:
FRONT COVER INDEX.
The front cover index contains a list of the most important topics contained in each
volume. It features a black box at the right edge of the cover which corresponds with a black box on the
page containing the topic. The topics listed on the front cover are highlighted in the table of contents with
TABLE OF CONTENTS.
Lists chapters, sections, appendixes, and indexes with page numbers in order of
List paragraphs contained in the individual chapters with paragraph and page numbers
in order of appearance.
Lists malfunctions contained in the troubleshooting table with page numbers in order of
Troubleshooting is contained in chapter 2. When a malfunction occurs, look at the symptom index for the vehicle
troubleshooting table in chapter 2.
Find the malfunction in the index.
Turn to the page number listed for the
malfunction in the troubleshooting table. Perform the steps required to correct the malfunction. If you can’t find the
malfunction, or the malfunction is not corrected, notify your supervisor.
Your scheduled maintenance is located in table 2-1, PMCS. These checks
and services are mandatory at the intervals listed. Always follow the WARNINGS and CAUTIONS.