TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 342 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1218
2-1218
2-1218
2-1218
2-1218
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE Test #91
REASON FOR QUESTION
4.
If continuity is not present,
remote control box internal
wiring harness is faulty.
If continuity is present,
BOOM UP/DOWN
controller is faulty.
Other crane functions from
remote station OK.
Boom down solenoid
cable OK.
Boom down solenoid OK.
External remote control
cable OK.
Remote control cable OK.
POSSIBLE PROBLEMS
Faulty remote control
box internal wiring
harness.
Faulty boom up/down
controller.
Is continuity present
from remote control box
connector pin M to BOOM
UP/DOWN controller
internal wiring harness
pin 4 and from remote
control box connector pin
H to BOOM UP/DOWN
controller internal wiring
harness pin 1?
NO
YES
Repair remote control box
internal wiring harness
(para 7-32).
Replace BOOM UP/DOWN
controller (para 7-32).
e109.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) BOOM DOWN DOES NOT OPERATE FROM
e109.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) BOOM DOWN DOES NOT OPERATE FROM
e109.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) BOOM DOWN DOES NOT OPERATE FROM
e109.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) BOOM DOWN DOES NOT OPERATE FROM
e109.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) BOOM DOWN DOES NOT OPERATE FROM
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
Back to Top
