TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1221
2-1221
2-1221
2-1221
2-1221
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter on pin
M of one end of external remote control cable
connector.
(3)
Connect negative (-) probe of multimeter on pin
M of other end of external remote control cable
and note reading on multimeter.
(4)
If continuity is not present, replace external
remote control cable.