TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 366 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1242
2-1242
2-1242
2-1242
2-1242
KNOWN INFO
TEST OPTIONS
Continuity Test or
STE/ICE Test #91
REASON FOR QUESTION
4.
POSSIBLE PROBLEMS
Faulty remote control
box internal wiring
harness.
Faulty telescope in/out
controller.
If continuity is not present,
remote control box internal
wiring harness is faulty.
If continuity is present,
TELESCOPE IN/OUT
controller is faulty.
Other crane functions from
remote station OK.
Telescope out solenoid
cable OK.
Telescope out solenoid OK.
External remote control
cable OK.
Remote control cable OK.
Is continuity present
from remote control box
connector pin C to
TELESCOPE IN/OUT
controller internal wiring
harness pin 4 and from
remote control box
connector pin H to
TELESCOPE IN/OUT
controller internal wiring
harness pin 1?
NO
YES
Repair remote control box
internal wiring harness
(para 7-32).
Replace TELESCOPE IN/OUT
controller (para 7-32).
e111.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) TELESCOPE OUT DOES NOT OPERATE FROM
e111.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) TELESCOPE OUT DOES NOT OPERATE FROM
e111.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) TELESCOPE OUT DOES NOT OPERATE FROM
e111.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) TELESCOPE OUT DOES NOT OPERATE FROM
e111.
M1084/M1086 MATERIAL HANDLING CRANE (MHC) TELESCOPE OUT DOES NOT OPERATE FROM
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
REMOTE STATION (CONT)
Back to Top
