TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 550 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1426
2-1426
2-1426
2-1426
2-1426
YES
NO
3.
KNOWN INFO
TEST OPTIONS
Circuit breaker OK.
Mode selector switch in
NORMAL position.
Hydraulic functions OK.
Pneumatic functions OK.
Dashboard cable
assembly OK.
Rear lights cable
assembly OK.
POSSIBLE PROBLEMS
Faulty station selector
switch.
Faulty wrecker control
panel wiring harness.
WARNING
Read WARNING
on following page.
Is 24 vdc present at station
selector switch pin 9?
Voltage Test or
STE/ICE-R Test #89
REASON FOR QUESTION
If 24 vdc is not present,
wire 9 is faulty. If 24 vdc
is present, station selector
switch is faulty.
Repair wire 9 (para 2-45) or
replace wrecker control panel
wiring harness (para 7-83).
Replace station selector
switch (para 7-34).
e136.
ALL M1089 CONTROL FUNCTIONS DO NOT OPERATE FROM WRECKER CONTROL PANEL AND
e136.
ALL M1089 CONTROL FUNCTIONS DO NOT OPERATE FROM WRECKER CONTROL PANEL AND
e136.
ALL M1089 CONTROL FUNCTIONS DO NOT OPERATE FROM WRECKER CONTROL PANEL AND
e136.
ALL M1089 CONTROL FUNCTIONS DO NOT OPERATE FROM WRECKER CONTROL PANEL AND
e136.
ALL M1089 CONTROL FUNCTIONS DO NOT OPERATE FROM WRECKER CONTROL PANEL AND
WRECKER REMOTE CONTROL (CONT)
WRECKER REMOTE CONTROL (CONT)
WRECKER REMOTE CONTROL (CONT)
WRECKER REMOTE CONTROL (CONT)
WRECKER REMOTE CONTROL (CONT)
Back to Top
