TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 564 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1440
2-1440
2-1440
2-1440
2-1440
NO
YES
KNOWN INFO
TEST OPTIONS
WARNING
Read WARNING
on following page.
3.
Circuit breaker CB50 OK.
M1089 Material Handling
Crane operates.
All functions operate from
wrecker control panel.
Hydraulic functions OK.
Station selector
switch OK.
Wrecker control panel
wiring harness OK.
POSSIBLE PROBLEMS
Faulty wrecker remote
control wiring harness.
Is 24 vdc present at
pin C of J1 and/or J2?
Voltage Test or
STE/ICE-R Test #89
REASON FOR QUESTION
If 24 vdc is not present,
wire 7 is faulty.
Repair wire 7 (para 2-45) or
replace wrecker control panel
wiring harness (para 7-83).
Perform Wrecker Pneumatic
Troubleshooting (aa1. All Wrecker
Functions Do Not Operate From
Wrecker Remote Control).
e137.
ALL WRECKER FUNCTIONS DO NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e137.
ALL WRECKER FUNCTIONS DO NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e137.
ALL WRECKER FUNCTIONS DO NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e137.
ALL WRECKER FUNCTIONS DO NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
e137.
ALL WRECKER FUNCTIONS DO NOT OPERATE FROM WRECKER REMOTE CONTROL (CONT)
Back to Top
