TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 566 of 1632
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
TM 9-2320-366-20-2
2-1442
2-1442
2-1442
2-1442
2-1442
START
1.
NO
YES
KNOWN INFO
POSSIBLE PROBLEMS
WARNING
Read WARNING
on following page.
TEST OPTIONS
Circuit breaker CB50 OK.
Mode selector switch in
NORMAL position.
Hydraulic functions OK.
Station selector switch
in wrecker control panel
position.
Operation from wrecker
control panel OK.
Faulty station selector
switch.
Faulty wrecker control
panel wiring harness.
Is 24 vdc present at
station selector switch
front pin?
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Wrecker control panel top cover removed
(para 17-20).
Personnel Required
(2)
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
STE/ICE-R (Item 41, Appendix C)
References
TM 9-4910-571-12&P
Voltage Test or
STE/ICE-R Test #89
REASON FOR QUESTION
If 24 vdc is not present,
station selector switch is
faulty.
e138. ALL WRECKER FUNCTIONS DO NOT OPERATE FROM WRECKER CONTROL PANEL
Replace station selector
switch (para 7-34).
Back to Top
