TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 899 of 1632

VOLTAGE TEST

(1)

Remove instrument panel assembly for

access (para 7-15).

(2)

Start engine (TM 9-2320-366-10-1).

(3)

Set multimeter to volts DC.

(4)

Disconnect connector J115 (top

connector) from WTEC II TEPSS.

(5)

Connect positive (+) probe of multimeter

to connector J115-2.

(6)

Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(7)

Connect positive (+) probe of multimeter

to connector J115-11.

(8)

Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(9)

If 12 to 14.5 VDC is not present at connector

J115-2 and J115-11, replace WTEC II

cab transmission harness (para 7-137).

(10)

Shut down engine (TM 9-2320-366-10-1).

Change 1

2-1703

TM 9-2320-366-20-2