TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 903 of 1632

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter

to connector J115-9.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

Connect positive (+) probe of multimeter

to connector J115-18.

(5)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(6)

If continuity is not present, replace WTEC II

cab transmission harness (para 7-137).

(7)

If continuity is present, replace WTEC II

TEPSS (para 8-2).

(8)

Connect connector J115 (top connector) to

WTEC II TEPSS.

(9)

Install instrument panel assembly (para

7-15).

(10)

Clear diagnostic codes (para 8-4).

Change 1

2-1706.1

TM 9-2320-366-20-2