TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1016 of 1396

TM 9-2320-366-20-3

7-51. M1084/M1086 JACK CYLINDER PROXIMITY SENSOR REPLACEMENT (CONT)

b. Installation.

(1) Position nut (1) approximately 1 1/4 - 1 3/8 in. (3.2 -

3.5 cm) from bottom of proximity sensor (2).

(2) Position proximity sensor (2) in mounting bracket (3) with

nut (4).

(3) Adjust proximity sensor (2) until gap between fitting (5)

and proximity sensor is 3/16 in. (0.5 cm).

(4) Tighten nuts (1 and 4).

NOTE

Install plastic cable ties as required.

(5) Connect proximity sensor connector (6) to connector (7).

7-262