TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1008 of 1396

TM 9-2320-366-20-3

7-48. OIL PRESSURE SWITCH REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Cab raised (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Antiseize Compound (Item 58, Appendix D)

a. Removal.

(1) Disconnect connector clamp (1) from connector J34 (2).

(2) Disconnect connector P34 (3) from connector J34 (2).

(3) Remove oil pressure switch (4) from fitting (5).

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. To avoid injury or death,

keep away from open fire and use in a

well-ventilated area. If adhesive, solvent,

or sealing compound gets on skin or

clothing, wash immediately with soap and

water.

Failure to comply may result in

injury to personnel.

(1) Apply antiseize compound to threads of oil pressure

switch (4).

(2) Install oil pressure switch (4) in fitting (5).

(3) Connect connector P34 (3) to connector J34 (2).

(4) Connect connector clamp (1) on connector J34 (2).

7-254

Change 1