TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 998 of 1396

TM 9-2320-366-20-3

7-244

Change 2

7-44.

AIR PRESSURE TRANSMITTER REPLACEMENT

This task covers:

a.

Removal

b.

Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Air tanks drained (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 58, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

20, Appendix D)

Packing, Preformed (Item 191.1, Appendix G)

Lockwasher (2) (Item 71, Appendix G)

a. Removal.

(1)

Remove nut (1), lockwasher (2), and terminal lug

TL151 (3) from air pressure transmitter terminal G

(4). Discard lockwasher.

(2)

Remove nut (5), lockwasher (6), and terminal lug

TL157 (7) from air pressure transmitter terminal

WK (8).

(3)

Remove air pressure transmitter (9) from reducer

(10).

(4)

Remove preformed packing (11) from air pressure

transmitter (9).

Discard preformed packing.

•

NOTE

•

Tag wires and connection points prior to

disconnecting.

•

Front brake air pressure transmitter and rear brake

air pressure transmitter are removed the same way.

Rear brake air pressure transmitter shown.

•

Terminal lugs on front brake air pressure transmitter

are TL150 for terminal G and TL156 for terminal

WK.

NOTE

Perform the following step on air pressure

transmitters equipped with preformed