TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 992 of 1396

TM 9-2320-366-20-3

7-42. M1088/M1089 STATIONARY WORKLIGHT ASSEMBLY REPLACEMENT/REPAIR

This task covers:

a. Removal

b. Disassembly

c. Assembly

d. Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Lockwasher (Item 96, Appendix G)

a. Removal.

NOTE

Left

side

and

right

side

stationary

worklight assemblies are removed the

same way. Right side shown.

(1) Disconnect worklight connector (1) from connector

P134A (2).

(2) Remove nut (3), lockwasher (4), washer (5) and

worklight assembly (6) from vehicle.

Discard

lockwasher.

b. Disassembly.

(1) Remove screw (1) and retaining ring (2) from worklight

assembly (3).

(2) Loosen two screws (4) on back of lamp (5).

(3) Disconnect two terminals (6) from lamp (5).

7-240