TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1059 of 1396

TM 9-2320-366-20-3

7-62. M1093/M1094 CAB CLEARANCE AND MARKER LIGHTS LOWER CABLE

ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

PDP cover removed (para 16-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)

Material/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Lockwasher (2) (Item 88, Appendix G)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

NOTE

Tag wires and connection points prior to

disconnecting.

(4) Remove two nuts (5), lockwashers (6), washers (7), and

cover (8) from terminal board TB1 (9).

Discard

lockwashers.

(5) Disconnect terminal lug TL74 (10) from terminal board

TB1 (9) position 3.

(6) Disconnect terminal lug TL86 (11) from terminal board

TB2 (12) position 4.

7-303