TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1066 of 1396

TM 9-2320-366-20-3

7-64. RIGHT-HAND DOOR AND CAB MARKER LIGHTS CABLE ASSEMBLY

REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

PDP cover removed (para 16-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (4) (Item 82, Appendix G)

Lockwasher (2) (Item 88, Appendix G)

Gasket (2) (Item 24, Appendix G)

a. Removal.

NOTE

• Note routing of right-hand door and cab marker

lights cable assembly prior to removal.

• Remove plastic cable ties as required.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

(4) Remove two nuts (5), lockwashers (6), washers (7), and

cover (8) from terminal board TB1 (9).

Discard

lockwashers.

(5) Disconnect terminal lug TL73 (10) from terminal board

TB1 (9) position 1.

(6) Disconnect terminal lug TL71 (11) from terminal board

TB2 (12) position 2.

7-310

Change 1