TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1087 of 1396

TM 9-2320-366-20-3

Change 2

7-331

7-70.

NATO POWER CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Battery box cover removed (TM 9-2320-366-10-2).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Apron, Rubber (Item 3, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Grease, Automotive and Artillery (GAA) (Item 22,

Appendix D)

Nut, Self-Locking (4) (Item 158, Appendix G)

Lockwasher (Item 87, Appendix G)

a. Removal.

(1)

Remove nut (1) and lockwasher (2) from battery

ground cable (3).

Discard lockwasher.

(2)

Deleted.

(3)

Remove terminal lugs TL50A (5), TL48 (6), and

battery tester terminal lug (7) from battery ground

cable (3).

WARNING

•

Remove rings, bracelets, watches, necklaces, and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and cause injury or short across electrical circuit and

cause severs burns or electrical shock.

Batteries can explode from a spark.

Battery acid is

harmful to skin and eyes.

Always wear eye protection when working with batteries.

Failure to

comply may result in injury to personnel.

•

Negative battery terminals and battery tester negative terminal lug must be disconnected first.

Failure to comply may result in serious injury or death to personnel.

NOTE

Tag battery terminals, terminal lugs, and

connection points prior to disconnecting.