TM-9-2320-366-20-3
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-3 - Page 1084 of 1396
TM 9-2320-366-20-3
7-68. WINDSHIELD WIPER ELECTROMAGNETIC INTERFERENCE (EMI) CABLE
REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
PDP cover removed (para 16-2).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 69, Appendix D)
a. Removal.
(1) Remove three screws (1) and washers (2) from PDP (3).
(2) Remove three screws (4) from PDP (3).
(3) Lift PDP (3) outward to gain access.
NOTE
Remove plastic cable ties as required.
(4) Disconnect windshield wiper EMI cable connector PX22
(5) from windshield wiper motor (6).
(5) Disconnect windshield wiper EMI cable connector P2 (7)
from connector J2 (8).
7-328
Back to Top
