TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 1076 of 1396

TM 9-2320-366-20-3

7-66. CAB CLEARANCE MARKER LIGHTS CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

PDP cover removed (para 16-2).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Materials/Parts

Lockwire (Item 30, Appendix D)

Lockwasher (10) (Item 82, Appendix G)

Lockwasher (2) (Item 88, Appendix G)

Gasket (5) (Item 24, Appendix G)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

(4) Remove two nuts (5), lockwashers (6), washers (7), and

cover (8) from terminal board TB1 (9).

Discard

lockwashers.

(5) Disconnect terminal lug TL74 (10) from terminal board

TB1 (9) position 3.

(6) Disconnect terminal lug TL86 (11) from terminal board

TB2 (12) position 4.

7-320

Change 1