TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 258 of 1396

2-2230

Change 1

KNOWN INFO

TEST OPTIONS

Pressure Test or

STE/ICE-R Test #51

This question eliminates

possible problems and

determines where

troubleshooting continues.

NO

YES

WARNING

Read WARNING

on following page.

1.

Other hydraulic manifold

functions OK.

Hydraulic hoses free from

leaks.

POSSIBLE PROBLEMS

Faulty hydraulic hose(s) 508

and/or 510.

Faulty suspension compression

tee fitting.

Faulty air/hydraulic manifold.

Faulty hydraulic hose 512.

Faulty hydraulic hose 513.

Faulty suspension release tee

fitting.

Faulty suspension cylinder(s).

Faulty hydraulic hose(s) 509

and/or 511.

Go to step 3

of this fault.

INITIAL SETUP

Equipment Condition

Engine shut down (TM 9-2320-366-10-1).

Personnel Required

(2)

Material/Parts

Rag, Wiping (Item 50, Appendix D)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

STE/ICE-R (Item 41, Appendix C)

Pan, Drain (Item 24, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Transducer, 10,000 PSI (Item 1, Appendix J)

Gloves, Rubber (Item 13, Appendix C)

References

TM 9-4910-571-12&P

Is 2,500-4,000 psi

(17,238-27,580 kPa)

present at suspension

cylinder input ports?

TM 9-2320-366-20-3

REASON FOR QUESTION

START

u2. SUSPENSION DOES NOT COMPRESS AND/OR RETURN TO NORMAL