TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 381 of 1396

TM 9-2320-366-20-3

CONTINUITY TEST

(1) Remove circuit breaker CB10 from Power

Distribution Panel (PD1).

(2) Set multimeter to ohms.

(3) Connect positive (+) probe of multimeter to

one terminal of circuit breaker CB10.

(4) Connect negative (-) probe of multimeter to

other probe of circuit breaker CB10 and

note reading on multimeter.

(5) If continuity is not present, replace circuit

breaker CB10 (para 20-80).

(6) If continuity is present, perform Special

Purpose Kit Troubleshooting task x1. No

Power to Digitization Rack.

Perform steps (7) through (10), if

continuity is present through circuit

breaker CB10.

(7) Install circuit breaker CB10 in Power

Distribution Panel (PD1)

(8) Position electrical distribution block cover

on power distribution shelf.

(9) Tighten wing nut on electrical distribution

block cover.

(10) Install wing screw on power distribution

shelf.

NOTE

All data on pages 2-2308 through 2-2371,

including pages 2-2309 through 2-2370 deleted.

Change 2

2-2307/(2-2308 Blank)