TM 9-2320-366-20-3
(3) Apply grease to bushing (8) and lever stud (9).
WARNING
Retaining rings are under tension and can
act as projectiles when released causing
severe
eye
injury.
Use
care
when
removing retaining rings.
Failure to
comply may result in injury to personnel.
(4) Install bushing (8) and lever (2) on lever stud (9) with
retaining ring (10).
(5) Apply grease to ball stud (1).
(6) Install ball seat (11) with threaded rod (12) on ball stud
(1).
(7) Install clip ring (13) on ball seat (11).
c. Follow-On Maintenance.
(1) Install instrument panel assembly (para 7-15).
(2) Start engine (TM 9-2320-366-10-1).
(3) Position windshield wiper control to off (TM 9-2320-366-
10-1).
(4) Depress accelerator pedal and check for smooth
operation.
(5) Check high/low HAND THROTTLE lever positions (para
4-22).
(6) Shut down engine (TM 9-2320-366-10-1).
End of Task.
4-101