TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 633 of 1396

TM 9-2320-366-20-3

4-22. CHECKING AND STENCILING HIGH/LOW HAND THROTTLE POSITIONS

This task covers:

a. Checking High/Low Hand Throttle Positions

b. Stenciling High/Low Hand Throttle Positions

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

STE/ICE-R (Item 41, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Respirator, Air Filter (Item 29, Appendix C)

Materials/Parts

Rubber Stamp Set, Fixed Type (Item 53, Appendix D)

Polyurethane Coating (Item 48, Appendix D)

Ink, Marking Stencil (Item 26, Appendix D)

Inking Pad, Rubber Stamp (Item 27, Appendix D)

References

TM 9-4910-571-12&P

TB 43-0209

a. Checking High/Low Hand Throttle Positions.

(1) Connect STE/ICE-R to DCA connector (1).

(2) Start engine (TM 9-2320-366-10-1).

(3) Position HAND THROTTLE lever (2) so that upper edge

of lever is even with line below L setting.

NOTE

Acceptable

engine

RPM

with

HAND

THROTTLE lever at L setting is 1250-1450

RPM.

(4) Perform STE/ICE-R test #10.

4-103