TM-9-2320-366-20-3

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-3 - Page 756 of 1396

TM 9-2320-366-20-3

7-20

Change 2

7-5.

100 AMP VOLTAGE REGULATOR REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Cab raised (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Lockwasher (2) (Item 104, Appendix G)

Nut, Self-Locking (Item 143, Appendix G)

Nut, Self-Locking (Item 144, Appendix G)

Sealing Compound (Item 59, Appendix D)

Tape, Insulation Electrical (Item 68, Appendix D)

Tie, Cable, Plastic (Item 69, Appendix D)

a. Removal.

(1)

Lift dust boot (1) on terminal lug TL35 (2).

(2)

Remove self-locking nut (3), washer (4), and terminal

lug TL35 (2) from voltage regulator (5).

Discard self-

locking nut.

(3)

Lift dust boot (6) on terminal lug TL110 (7).

(4)

Remove self-locking nut (8), washer (9), and terminal

lug TL110 (7) from voltage regulator (5).

Discard

self-locking nut.

NOTE

Tag wires and connection points prior to

disconnecting.

NOTE

Perform steps (3) and (4) on vehicles

equipped with alternator P/N N1506-1

(12420852).