TM 9-2320-366-20-3
7-6. AUXILIARY STARTER SOLENOID REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Cab raised (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 36, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Adhesive (Item 8, Appendix D)
Lockwasher (2) (Item 87, Appendix G)
Lockwasher (2) (Item 89, Appendix G)
Nut, Self-Locking (2) (Item 128, Appendix G)
a. Removal.
NOTE
Tag wires and connection points prior to
disconnecting.
(1) Remove adhesive, two nuts (1), lockwashers (2),
terminal lugs TL9 (3) and TL24 (4) from auxiliary starter
solenoid (5). Discard lockwashers.
(2) Remove adhesive, two nuts (6), lockwashers (7),
terminal lugs TL23 (8) and TL33 (9) from auxiliary starter
solenoid (5). Discard lockwashers.
7-23