TM 9-2320-366-20-3
NOTE
Perform steps (13) through (16) on junction
boxes that have not had modification kit
installed.
(13) Install lockout relay (37) and shutdown relay (38) on
brackets (39 and 40) with six washers (41), lockwashers
(42), and nuts (43).
(14) Install brackets (39 and 40) in junction box (2) with six
rivets (44).
(15) Install shrink tubing (45) over ends of five wires (46) and
solder ends on shutdown relay (38) positions 1 through
5.
(16) Install shrink tubing (45) over ends of five wires (47) and
solder ends on lockout relay (37) positions 1 through 5.
Change 1
7-151