TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1047 of 1558

TM 9-2320-366-20-4

15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR

This task covers:

a. Removal

b. Disassembly

c. Inspection

d. Assembly

e. Installation

f.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Trestle, Motor Vehicle Maintenance (2) (Item 47,

Appendix C)

Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)

Socket, Socket Wrench (Item 70, Appendix B)

Wrench Set, Socket (Item 50, Appendix C)

Materials/Parts

Solvent, Dry Cleaning (Item 65, Appendix D)

Grease, Automotive and Artillery (GAA) (Item

22, Appendix D)

Nut, Self-Locking (4) (Item 162, Appendix G)

Nut, Self-Locking (8) (Item 154, Appendix G)

Nut, Self-Locking (8) (Item 156, Appendix G)

Nut, Self-Locking (2) (Item 160, Appendix G)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Left and right sides of rear stabilizer bar are

disconnected the same way.

Right side

shown.

(1) Position trestles under rear stabilizer bar (1).

15-9