TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1050 of 1558

TM 9-2320-366-20-4

15-5. REAR STABILIZER BAR REPLACEMENT/REPAIR (CONT)

c. Inspection.

NOTE

• If axle brackets fail visual inspection, notify DS

Maintenance.

• Replace any part that fails visual inspection.

• Perform step (1) on both sides of vehicle.

(1) Inspect axle brackets (1) and welds around axle brackets

for cracks and corrosion.

(2) Inspect two resilient mounts (2) for cracks, breaks, or

deterioration.

(3) Inspect two brackets (3) for cracks, breaks, or corrosion.

(4) Inspect two brackets (4) for cracks, breaks, or corrosion.

d. Assembly.

NOTE

Left and right sides of rear stabilizer bar are

assembled the same way. Right side shown.

(1) Install resilient mount (1) on rear stabilizer bar (2).

(2) Install bracket (3) on resilient mount (1).

(3) Position bracket (4) on bracket (3) with four bolts (5) and

self-locking nuts (6).

15-12

Change 1