TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 1236 of 1558
TM 9-2320-366-20-4
16-23. M1089 TOOL BOX REPLACEMENT/REPAIR
This task covers:
a. Removal
b. Disassembly
c. Assembly
d. Installation
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Tools removed from tool boxes (TM 9-2320-366-10-
1).
Placards removed (para 2-39).
M1089 ladder lowered (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58,
Appendix C)
Sling, Cargo (Item 69, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Nut, Self-Locking (Item 147, Appendix G)
Lockwasher (5) (Item 99, Appendix G)
Materials/Parts (Cont)
Nut, Self-Locking (20) (Item 164, Appendix G)
Bumper Nonmetallic (4) (Item 4, Appendix G)
Nut, Self-Locking (14) (Item 135, Appendix G)
Lockwasher (20) (Item 111, Appendix G)
Nut, Self-Locking (8) (Item 165, Appendix G)
Lockwasher (8) (Item 112, Appendix G)
Rubber Strip (Item 260, Appendix G)
Nut, Self-Locking (14) (Item 133, Appendix G)
Nut, Self-Locking (8) (Item 136, Appendix G)
Nut, Self-Locking (12) (Item 150, Appendix G)
Nut, Self-Locking (24) (Item 149, Appendix G)
Nut, Self-Locking (2) (Item 176, Appendix G)
Grommet, Nonmetallic (2) (Item 48, Appendix G)
Grommet, Nonmetallic (2) (Item 50, Appendix G)
Personnel Required
(2)
a. Removal.
WARNING
Wear appropriate eye protection when
working
under
vehicle
due
to
the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
NOTE
• Step (1) requires the aid of an assistant.
• Front and rear tool boxes are removed the same
way. Rear tool box shown.
(1) Remove self-locking nut (1), two washers (2), and screw
(3) from ladder support hand rail bracket (4). Discard
self-locking nut.
16-166
Back to Top
