TM 9-2320-366-20-4
NOTE
• All four reflectors are removed the same way.
One shown.
• Step (15) requires the aid of an assistant.
(15) Remove two self-locking nuts (28), lockwashers (29),
screws (30), and reflector (31) from tool box (10).
Discard self-locking nuts and lockwashers.
(16) Perform step (15) on remaining reflectors.
NOTE
• Left and right electrical connector brackets are
removed the same way. Left connector bracket
shown.
• Step (17) requires the aid of an assistant.
(17) Remove two self-locking nuts (32), four washers (33),
two screws (34), and electrical connector bracket (35)
from tool box (10). Discard self-locking nuts.
(18) Perform step (17) on right side electrical connector
bracket.
16-169