TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1262 of 1558

TM 9-2320-366-20-4

16-192

Change 2

16-26.

LATCH AND CAB LATCH BRACKETS REPLACEMENT

This task covers:

a. Latch Bracket Removal

b. Latch Bracket Installation

c. Cab Latch Bracket Removal

d. Cab Latch Bracket Installation

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Cab Support Tool (Item E-4, Appendix E)

Materials/Parts

Sealing Compound (Item 55.2, Appendix D)

Nuts, Self-Locking (2) (Item 168, Appendix G)

Personnel Required

(2)

a. Latch Bracket Removal.

(1)

Raise cab (TM 9-2320-366-10-1).

(2)

Install cab support tool on engine rear lifting eye

(1).

(3)

Lower cab until cab rests on cab support tool (TM

9-2320-366-10-1).

(4)

Remove three bolts (2) and washers (3) from latch

bracket (4).

NOTE

Perform step (5) on vehicles 0001 through 7167.

(5)

Remove two self-locking nuts (5), screws (6),spacers

(7), washers (8), and latch bracket (4) from cab (9).

Discard self-locking nuts and spacers.

NOTE

Perform step (6) on vehicles 7168 and higher.

(6)

Remove two self-locking nuts (5), screws (6),

washers (8), and latch bracket (4) from cab (9).

Discard self-locking nuts.