TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 1270 of 1558

TM 9-2320-366-20-4

16-198

Change 2

16-27.

ROOF HATCH REPLACEMENT (ALL MODELS EXCEPT M1093/M1094) (CONT)

b. Installation.

(1)

Install inside rubber strip (1) on roof hatch (2).

(2)

Install outside rubber strip (3) on roof hatch (2).

(3)

Install 6 in. (15.2 cm) back-up rubber strips (4)

centered on joints of inside and outside rubber

strips (1 and 3).

(4)

Position roof hatch (2) on cab roof (5) with

matchmarks aligned.

(5) Position 12 washers (6) and screws (7) in roof hatch

(2).

(6)

Tighten 12 screws (7) to 35-41 lb-ft (48-56 N

•

m).

(7)

Apply 0.625 in. (1.5 cm) bead of sealing compound

to 12 screws (6) and between roof hatch (2) and

cab roof (5).

End of Task.

CAUTION

WARNING

Begin inside and outside rubber strip

installation on opposite sides of each other.

Failure to comply may result in damage to

equipment.

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.