TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 177 of 1558

TM 9-2320-366-20-4

7-104. M1088 REAR LIGHTS CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Muffler and heat shield removed (para 5-2).

Kick panel removed (para 16-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (8) (Item 76, Appendix G)

Lockwasher (4) (Item 82, Appendix G)

Lockwasher (4) (Item 96, Appendix G)

Nut, Self-Locking (13) (Item 128, Appendix G)

Washer, Spring (2) (Item 289, Appendix G)

Personnel Required

(2)

a. Removal.

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

NOTE

• Remove plastic cable ties as required.

• Tag connectors, terminal lugs, and connect-ion

points prior to disconnecting.

(1) Disconnect connector P74 (1), P76 (2), P77 (3), and P78

(4) from left composite light connectors 22 (5), 24 (6), 23

(7), and 21 (8).

Change 1

7-505