TM 9-2320-366-20-4
7-104. M1088 REAR LIGHTS CABLE ASSEMBLY REPLACEMENT (CONT)
NOTE
Left side and right side stationary worklight
assemblies are removed the same way.
Right side shown.
(42) Disconnect connector P134A (113) from stationary
worklight connector (114).
(43) Raise cab (TM 9-2320-366-10-1).
(44) Loosen two screws (115) on exhaust heat shield (116).
(45) Remove rear lights cable assembly (36) from behind
exhaust heat shield (116).
(46) Remove self-locking nut (117), two clamps (118 and
119), and screw (120) from right frame rail (62). Discard
self-locking nut.
(47) Remove clamp (119) from rear lights cable assembly
(36).
7-514
Change 1