TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 218 of 1558

TM 9-2320-366-20-4

7-109. M1089 CONTROL PANEL POWER CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Lockwasher (8) (Item 100, Appendix G)

Nut, Self-Locking (2) (Item 133, Appendix G)

a. Removal.

(1) Remove eight screws (1), lockwashers (2), and washers

(3)

from

control

panel

top

cover

(4).

Discard

lockwashers.

(2) Remove two self-locking nuts (5), four washers (6), two

screws (7), and control panel top cover (4) from control

panel (8). Discard self-locking nuts.

NOTE

• Tag electrical wires and connection points prior

to disconnecting.

• Remove plastic cable ties as required.

(3) Loosen five screws (9) on terminal board assembly (10)

at positions 9,9,10,19,C (11).

(4) Remove

five

electrical

wires

(12)

from

positions

9,9,10,19,C (11) on terminal board assembly (10).

7-550