TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 221 of 1558

TM 9-2320-366-20-4

7-110. M1089 CRANE POWER CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

MHC erected (TM 9-2320-366-10-2).

Engine shut down (TM 9-2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Tool Kit, Electrical (Item 45, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Varnish, Oil (Item 70, Appendix D)

Lockwasher (8) (Item 102, Appendix G)

Nut, Self-Locking (2) (Item 135, Appendix G)

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Remove eight screws (1), lockwashers (2), and washers

(3) from control panel cover (4). Discard lockwashers.

(2) Remove two self-locking nuts (5), four washers (6), two

screws (7), and control panel top cover (4) from control

panel (8). Discard self-locking nuts.

NOTE

Tag wires and connection points prior to

disconnecting.

(3) Loosen screws (9 and 10) on terminal board (11)

positions 7A and C.

(4) Remove black wire (12), green wire (13), and shield (14)

from terminal block (11).

7-553