TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 386 of 1558

TM 9-2320-366-20-4

7-144. M1089 JUNCTION BOX MODIFICATION (CONT)

(6) Unsolder five wires (8) from shutdown relay (9). Discard

five wires.

WARNING

Wear appropriate eye protection when

removing rivets.

Failure to comply may

result in injury to personnel.

(7) Remove three rivets (10) and bracket (11) from junction

box (2). Discard shutdown relay and bracket.

(8) Install three rivets (10) in junction box (2).

NOTE

Measurements and drilling will be on the

outside on rear of junction box.

(9) Measure and mark junction box (2) 3.30 in. (83.8 mm)

over from curb side edge.

(10) Measure and mark junction box (2) 4.55 in. (115 mm)

over from curb side edge.

(11) Measure and mark junction box (2) 1.57 in. (40 mm) up

from bottom.

(12) Drill two 0.172 in. (4.37 mm) holes at marked locations

on junction box (2).

7-716

Change 1