TM-9-2320-366-20-4
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-4 - Page 41 of 1558
TM 9-2320-366-20-4
Change 2
7-365
7-80.
ENGINE CONTROL CABLE ASSEMBLY REPLACEMENT
This task covers:
a.
Removal
b.
Installation
c.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Instrument panel assembly removed for access (para 7-
15).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Lockwasher (2) (Item 93, Appendix G)
Lockwasher (Item 103, Appendix G)
Nut, Self-Locking (2) (Item 143, Appendix G)
Nut, Self-Locking (Item 144, Appendix G)
Nut, Self-Locking (5) (Item 128, Appendix G)
Tape, Insulation, Electrical (Item 68, Appendix D)
a. Removal.
NOTE
(1)
Disconnect connector P31 (1) from connector J31
(2).
(2)
Disconnect connector P31X (3) from connector J31X
(4).
•
Remove plastic cable ties as required.
•
Note routing of engine control cable
assembly prior to removal.
•
Tag connectors and connection points prior
to disconnecting.
Back to Top
