TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 414 of 1558

TM 9-2320-366-20-4

7-744

Change 2

7-146. DUMP SWITCH BRACKET AND JUMPER CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c.

Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item 20,

Appendix D)

Personnel Required

(2)

a. Removal.

(1) Remove two screws (1) and washers (2) from dump

switch bracket (3).

(2)

Lift dump switch bracket (3) outward from instrument

panel (4) to gain access.

(3)

Lift tab (5) on connector P911 (6).

(4)

Disconnect connector P911 (6) from DUMP BED

UP/DOWN switch (7).

(5)

Disconnect connector P911A (8) from DUMP BED

UP/DOWN switch (7).

NOTE

•

Tag electrical connectors and connection

points prior to removal.

•

All rocker switches are removed the same

way.

DUMP BED UP/DOWN switch

shown.