TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 420 of 1558

TM 9-2320-366-20-4

Section II. MAINTENANCE PROCEDURES

8-2. WTEC II TRANSMISSION ECU PUSHBUTTON SHIFT SELECTOR (TEPSS) AND

BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Calibration

INITIAL SETUP

Equipment Conditions

Instrument panel assembly removed for access (para 7-

15).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-75 lb-in. (Item 59, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Solvent, Dry Cleaning SD (P-D-680) (Item 65,

Appendix D)

Paper, Abrasive (Item 47, Appendix D)

Fastener Tape (Item 12, Appendix G)

Fastener Tape (Item 13, Appendix G)

a. Removal.

NOTE

Tag connectors and connection points prior

to disconnecting.

(1) Disconnect connector J115 (1) from WTEC II TEPSS (2).

(2) Disconnect connector J114 (3) from WTEC II TEPSS (2).

(3) Remove screw (4), washer (5), and ground terminal lug

(6) from WTEC II TEPSS (2).

8-2