TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 425 of 1558

TM 9-2320-366-20-4

b. Installation.

(1) Install WTEC III TPSS (1) in instrument panel assembly

(2).

(2) Position two brackets (3) and self-locking nuts (4) on

WTEC III TPSS (1).

(3) Tighten two self-locking nuts (4) to 11-13 lb-in. (1-2

N·m).

(4) Connect connector PX33 (5) to WTEC III TPSS

connector (6).

c. Calibration.

(1) Install instrument panel assembly (para 7-15).

NOTE

WTEC III TPSS requires calibration after

replacement. Calibration is accomplished in

steps (1.1) through (4).

(1.1) Position master power switch to on and wait for neutral

(N) indication from WTEC III TPSS (TM 9-2320-366-10-

1).

(2) Position master power switch to off (TM 9-2320-366-10-

1).

(3) Perform steps (1) and (2) four more times.

(4) Position master power switch to on (TM 9-2320-366-10-

1).

(5) Start engine (TM 9-2320-366-10-1).

(6) Check volts gage for charge indication (TM 9-2320-366-

10-1).

Change 1

8-7