TM 9-2320-366-20-4
8-12. M1088 TRANSMISSION AUXILIARY OIL COOLER AND BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)
Wrench Set, Socket (Item 51, Appendix C)
Wrench, Box and Open End (Item 54, Appendix C)
Wrench, Box and Open End (Item 55, Appendix C)
Crow foot Attachment, Socket Wrench (Item 12.1,
Appendix B)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 20, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Packing, Preformed (2) (Item 178.1, Appendix G)
Packing, Preformed (2) (Item 179, Appendix G)
Nut, Self-Locking (4) (Item 161, Appendix G)
Nut, Self-Locking (10) (Item 154, Appendix G)
Nut, Self-Locking (4) (Item 150, Appendix G)
Nut, Self-Locking (8) (Item 167, Appendix G)
Washer, Spring (8) (Item 292, Appendix G)
Personnel Required
(2)
WARNING
•
Wear appropriate eye protection when working under vehicle due to the
possibility of falling debris.
Failure to comply may result in injury to
personnel.
•
Ensure exhaust system is cool before preforming maintenance. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
CAUTION
Cap or plug hoses and fittings when disconnecting to prevent contamination of
transmission oil. Failure to comply may result in damage to equipment.
NOTE
•
Tag hoses and fittings prior to disconnecting.
•
Remove plastic cable ties as required.
Change 1
8-51