TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-4 - Page 489 of 1558

TM 9-2320-366-20-4
8-13. M1089 TRANSMISSION AUXILIARY OIL COOLER AND BRACKET REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-57).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Pan, Drain (Item 24, Appendix C)
Tool Kit, Genl Mech (Item 46, Appendix C)
Wrench, Torque, 0-200 lb in. (Item 59,
Appendix C)
Wrench, Torque, 0-175 lb ft (Item 58, Appendix
C)
Wrench, Torque, 0-600 lb-ft (Item 60, Appendix
C)
Wrench Set, Socket (Item 51, Appendix C)
Socket Set, Socket Wrench (Item 34, Appendix
C)
Crowfoot Attachment, Socket Wrench (Item
12.1, Appendix B)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape (Item
20, Appendix D)
Cap and Plug Set (Item 14, Appendix D)
Ties, Cable, Plastic (Item 69, Appendix D)
Nut, Self-Locking (2) (Item 128, Appendix G)
Nut, Self-Locking (2) (Item 136, Appendix G)
Nut, Self-Locking (4) (Item 150, Appendix G)
Nut, Self-Locking (10) (Item 154, Appendix G)
Nut, Self-Locking (4) (Item 161, Appendix G)
Nut, Self-Locking (8) (Item 167, Appendix G)
Nut, Self-Locking (2) (Item 168, Appendix G)
Washer, Spring (8) Item 292, Appendix G)
Packing, Preformed (2) (Item 178.1, Appendix G)
Packing, Preformed (4) (Item 179, Appendix G)
Personnel Required
(2)
WARNING
WARNING
Wear appropriate eye protection when working under vehicle due to the
possibility of falling debris.
Failure to comply may result in injury to
personnel.
Ensure exhaust system is cool before preforming maintenance. Failure to
comply may result in injury to personnel.
a. Removal.
CAUTION
Cap or plug hoses and fittings when disconnecting to prevent contamination of
transmission oil. Failure to comply may result in damage to equipment.
NOTE
Tag hoses and fittings prior to disconnecting.
Remove plastic cable ties as required.
Change 1
8-61


Back to Top