TM-9-2320-366-20-4

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-4 - Page 504 of 1558

TM 9-2320-366-20-4

8-14. M1090/M1094 TRANSMISSION AUXILIARY OIL COOLER REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Dump body raised to maintenance position (TM 9-

2320-366-10-1).

Batteries disconnected (para 7-57).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Pan, Drain (Item 24, Appendix C)

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-175 lb-ft (Item 58, Appendix C)

Wrench, Torque 0-200 lb-in.(Item 60, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

Crowfoot Attachment, Socket Set (Item 12.1,

Appendix B)

Material/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 20, Appendix D)

Cap and Plug Set (Item 14, Appendix D)

Ties, Cable, Plastic (Item 69, Appendix D)

Nut, Self-Locking (6) (Item 155, Appendix G)

Nut, Self-Locking (12) (Item 154, Appendix G)

Packing, Preformed (2) (Item 178.1, Appendix G)

Packing, Preformed (4) (Item 179, Appendix G)

Transmission Auxiliary Oil Cooler Rubber Seal

(2) (Item E-10, Appendix E)

Personnel Required

(2)

WARNING

•

Wear

appropriate

eye

protection

when

working under vehicle due to the possibility

of falling debris.

Failure to comply may

result in injury to personnel.

•

Ensure

exhaust

system

is

cool

before

preforming maintenance. Failure to comply

may result in severe burns.

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Disconnect connector clamp (1) from connector P209

(2).

(2) Disconnect connector P209 (2) from connector J209 (3).

8-74

Change 1